ISMM2080 overall

Suitable for manual pulse input type such as NC or milling machinery. High reliability, terminal connection type.

Power supply; 5V DV, 12V DC.

Customer’s logo available.


Industrial tooling machinery.

Output Waveform

90 Output phase difference, CW rotation

(CW rotation as seen from fit surface)

ISM6045 rotation (1)

A leads B clockwise when viewing the encoder shaft end.

Click-stop position falls within hatched area.

Technical Specifications

Electrical specifications
Output wave Square wave
Output signals A,B, (line driver output A,A,B,B phase)
Current consumption 100mA
response frequency 0~20KHz
Output phase difference 90 45
Supply voltage 5V DC, 5-12V DC
Signal level VH 85% Vcc, VL 0.3V
Number of pulses 100 (other number of pulse available on request)
Output circuit Open collector NPN, Push pull, Voltage, Line driver
Mechanical Specifications
Signal Position 4 kind
Speed without sealing 500rmp
Starting torque without sealing 2.0×10-2~6.0×10-2N m (+25 C)
Shock resistance 980m/s2, 6ms, 2 hours each on XYZ
Vibration proof 50m/s2, 10~200Hz, 2 hours each on XYZ
Working life MTBF 10000h (+25 C, 2000rpm)
Weight Appr. 740g
Environmental Specifications
Working humidity 30~85% (no condensation)
Storage temperature -30 C~85 C
Working temperature -10 C~70 C
Protection class IP54

Terminal Assignment

Electrical Spenfications of Selection Switch
Switch load 0.4VA Max. Voltage 25V
Circuit width 0.1-50mA
Electrical Spenfications of Control Switch
Connection point AC Max. load AV220V 0.5A
DC Max. load DC24V 1A
Electrical Spenfications of Stop Switch
Connection point AC Max. load AV220V 0.5A
DC Max. load DC24V 1A

Ordering Code

ISMM1468 001 100 B 5 L
Series Sequence Number Number of Pulses Output Signals Supply Voltage Output Circuit

Selection Guide


ISMM2080 dimensions


ISMM2080 wiring

Motors described above are typical and can be customized upon request.

© Copyright 2024. Sinotech, Inc. All rights reserved.