Optical Encoder 60mm Diameter Incremental Solid Shaft Manual Type

Suitable for manual pulse input type such as NC or milling machinery. High reliability, terminal connection type.

Power supply; 5V DV, 12V DC.

Customer’s logo available.

Applications:

Industrial tooling machinery.

90 Output phase difference, CW rotation

(CW rotation as seen from fit surface)

A leads B clockwise when viewing the encoder shaft end.

Click-stop position falls within hatched area.

Electrical specifications
Output wave	Square wave
Output signals	A,B, (line driver output A,A,B,B phase)
Current consumption	100mA
response frequency	0~20KHz
Output phase difference	90 45
Supply voltage	5V DC, 5-12V DC
Signal level	VH 85% Vcc, VL 0.3V
Number of pulses	100 (other number of pulse available on request)
Output circuit	Open collector NPN, Push pull, Voltage, Line driver
Mechanical Specifications
Signal Position	4 kind
Speed without sealing	500rmp
Starting torque without sealing	1.0×10-2Nm (+25 C)
Shock resistance	980m/s2, 6ms, 2 hours each on XYZ
Vibration proof	50m/s2, 10~200Hz, 2 hours each on XYZ
Working life	MTBF 10000h (+25 C, 2000rpm)
Weight	Appr. 200g
Environmental Specifications
Working humidity	30~85% (no condensation)
Storage temperature	-30 C~85 C
Working temperature	-10 C~70 C
Protection class	IP54

Code
Cable Color	Red	Black	Green	Brown	White	Grey	Yellow	Orange	N.C
Note: Shield is attached to connector housing, 1 meter cable lengths (other cable lengths on order)

ISC3806	-H03	G	600	BZ3	5-12	C
Series	Sequence Number	Connection	Number of Pulses	Output Signals	Supply Voltage	Output Circuit

Motors described above are typical and can be customized upon request.

Products