Optical Encoder 60mm Diameter Incremental Solid Shaft Manual Type

Suitable for manual pulse input type such as NC or milling machinery. High reliability, terminal connection type.

Power supply; 5V DV, 12V DC.

Customer’s logo available.

Applications:

Industrial tooling machinery.

90 Output phase difference, CW rotation

(CW rotation as seen from fit surface)

A leads B clockwise when viewing the encoder shaft end.

Click-stop position falls within hatched area.

Electrical specifications
Output wave	Square wave
Output signals	A,B, (line driver output A,A,B,B phase)
Current consumption	100mA
response frequency	0~20KHz
Output phase difference	90 45
Supply voltage	5V DC, 5-12V DC
Signal level	VH 85% Vcc, VL 0.3V
Number of pulses	100 (other number of pulse available on request)
Output circuit	Open collector NPN, Push pull, Voltage, Line driver
Mechanical Specifications
Signal Position	4 kind
Speed without sealing	500rmp
Starting torque without sealing	1.0×10-2Nm (+25 C)
Shock resistance	980m/s2, 6ms, 2 hours each on XYZ
Vibration proof	50m/s2, 10~200Hz, 2 hours each on XYZ
Working life	MTBF 10000h (+25 C, 2000rpm)
Weight	Appr. 200g
Environmental Specifications
Working humidity	30~85% (no condensation)
Storage temperature	-30 C~85 C
Working temperature	-10 C~70 C
Protection class	IP54

Code
Cable Color	Red	Black	Green	Brown	White	Grey	Yellow	Orange	N.C
Note: Shield is attached to connector housing, 1 meter cable lengths (other cable lengths on order)

ISC3806	-H03	G	600	BZ3	5-12	C
Series	Sequence Number	Connection	Number of Pulses	Output Signals	Supply Voltage	Output Circuit

Motors described above are typical and can be customized upon request.

60mm Diameter Incremental Solid Shaft Manual Type Optical Encoder